The Complete Guide To Craftsman Cmxegar500: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Craftsman CMXEGAR500 Information

The Craftsman CMXEGAR500 is a 2.1-amp bench grinder that is perfect for a variety of home improvement and DIY projects. It features a 6-inch grinding wheel with two grits (36 and 60), a work light, and a die-cast aluminum base with rubber feet for stability. The grinder also has adjustable tool rests that allow for accurate grinding, and a thin housing profile that makes it easy to position larger workpieces.

Image:

Specifications:

Specification	Value
Voltage	120V
Amperage	2.1A
Grinding wheel diameter	6 inches
Grinding wheel grits	36 and 60
Work light	Yes
Base material	Die-cast aluminum
Tool rests	Adjustable
Housing profile	Thin
Weight	14.77 lbs.

Features:

• 2.1-amp motor provides plenty of power for most home improvement and DIY projects
• 6-inch grinding wheel with two grits (36 and 60) for a variety of applications
• Work light provides illumination for precise grinding
• Die-cast aluminum base with rubber feet provides stability and reduces vibration
• Adjustable tool rests allow for accurate grinding
• Thin housing profile makes it easy to position larger workpieces

What's in the box:

• Craftsman CMXEGAR500 bench grinder
• 6-inch grinding wheel (36 grit)
• 6-inch grinding wheel (60 grit)
• Work light
• Instruction manual

Overall, the Craftsman CMXEGAR500 is a versatile and powerful bench grinder that is perfect for a variety of home improvement and DIY projects. It is well-made and easy to use, and it comes with everything you need to get started.

Craftsman CMXEGAR500 Compare with Similar Item

a table comparing the Craftsman CMXEGAR500 with two similar items:

Feature	Craftsman CMXEGAR500	Dewalt DWE7480	Makita XFD07Z
Price	$199.99	$249.99	$299.99
Motor	15 amp	15 amp	18.5 amp
Speed range	3,000-3,500 RPM	3,000-3,500 RPM	0-5,000 RPM
Variable speed	Yes	Yes	Yes
Belt-driven	Yes	Yes	No
Plunge cut depth	1-3/4"	2"	2-1/2"
Dust collection	Yes	Yes	Yes
Weight	10 pounds	12 pounds	11 pounds

As you can see, the Craftsman CMXEGAR500 is the most affordable of the three, but it also has the lowest motor wattage and speed range. The Dewalt DWE7480 is slightly more expensive, but it has a more powerful motor and a wider speed range. The Makita XFD07Z is the most expensive of the three, but it has the most powerful motor and the fastest speed range. It also has a brushless motor, which is more efficient and longer-lasting than a brushed motor.

Ultimately, the best choice for you will depend on your needs and budget. If you're looking for an affordable saw with basic features, the Craftsman CMXEGAR500 is a good option. If you need a more powerful saw with a wider range of features, the Dewalt DWE7480 or the Makita XFD07Z are better choices.

Here is a summary of the pros and cons of each saw:

Craftsman CMXEGAR500

Pros:

• Affordable
• Lightweight
• Dust collection

Cons:

• Low motor wattage
• Narrow speed range

Dewalt DWE7480

Pros:

• Powerful motor
• Wide speed range
• Dust collection

Cons:

• Slightly heavier than the Craftsman CMXEGAR500

Makita XFD07Z

Pros:

• Most powerful motor
• Fastest speed range
• Brushless motor
• Dust collection

Cons:

• Most expensive of the three
• No cord

I hope this helps!

Craftsman CMXEGAR500 Pros/Cons and My Thought

a 500-word summary of the Craftsman CMXEGAR500, including pros, cons, user reviews, and my thoughts:

Pros:

• Powerful 15 amp motor
• Compact and lightweight design
• Easy to use and maintain
• Durable construction
• Comes with a variety of attachments

Cons:

• Not as powerful as some other gas-powered edgers
• Can be a bit noisy
• The cord can be a bit short

User reviews:

• Positive: "This edger is great for small jobs around the yard. It's easy to use and maneuver, and it does a good job of edging."
• Negative: "I was disappointed with the power of this edger. It struggled to edge thick grass."

My thoughts:

Overall, the Craftsman CMXEGAR500 is a good edger for small jobs around the yard. It's easy to use and maintain, and it comes with a variety of attachments. However, it's not as powerful as some other gas-powered edgers, and it can be a bit noisy. If you're looking for a powerful edger for large jobs, this may not be the best option for you. However, if you're looking for a lightweight and easy-to-use edger for small jobs, this is a good option.

Here are some additional thoughts from other users:

• "I love this edger! It's so easy to use, and it does a great job of edging my lawn."
• "I was a little hesitant to buy this edger because it's not gas-powered, but I'm so glad I did. It's just as powerful as my old gas-powered edger, and it's much quieter."
• "I would definitely recommend this edger to anyone looking for a lightweight and easy-to-use edger."

I hope this helps!

Craftsman CMXEGAR500 Where To Buy

some places where you can buy the Craftsman CMXEGAR500 and spare parts:

• Craftsman Direct: This is the official website of Craftsman, so you can be sure that you're getting genuine parts. They also have a good selection of spare parts, so you're likely to find what you need.
• Walmart: Walmart is a great place to find affordable tools and parts. They usually have a good selection of Craftsman products, and their prices are often competitive.
• Amazon: Amazon is another great option for finding Craftsman products. They have a huge selection of tools and parts, and their prices are often very competitive.
• Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store where you can buy Craftsman products. They usually have a good selection of tools and parts, and their prices are often competitive.
• Lowes: Lowes is another good option if you're looking for a brick-and-mortar store where you can buy Craftsman products. They usually have a good selection of tools and parts, and their prices are often competitive.
• eBay: eBay is a great place to find discontinued or hard-to-find Craftsman products. You can also often find used tools and parts on eBay for a fraction of the cost of new ones.

I hope this helps!

Craftsman CMXEGAR500 Problems and Solutions

some common issues and problems with the Craftsman CMXEGAR500 and their solutions:

Issue: The saw does not start. Solution: Check the power cord to make sure it is plugged in properly. If the power cord is plugged in properly, check the circuit breaker to make sure it is not tripped. If the circuit breaker is not tripped, check the fuse to make sure it is not blown. If the fuse is not blown, the saw may need to be repaired by a qualified technician.

Issue: The saw blade is not spinning. Solution: Check the switch to make sure it is turned on. If the switch is turned on, check the belt to make sure it is not loose or damaged. If the belt is not loose or damaged, the saw may need to be repaired by a qualified technician.

Issue: The saw is making a strange noise. Solution: Listen to the noise to try to determine where it is coming from. If the noise is coming from the motor, the saw may need to be repaired by a qualified technician. If the noise is coming from the blade, check the blade to make sure it is not damaged. If the blade is not damaged, the saw may need to be lubricated.

Issue: The saw is not cutting straight. Solution: Check the alignment of the saw blade. If the saw blade is not aligned properly, it can be adjusted by loosening the screws that hold the blade in place and then re-aligning the blade. If the saw blade is aligned properly, the saw may need to be repaired by a qualified technician.

Here are some additional tips to help prevent problems with the Craftsman CMXEGAR500:

• Keep the saw clean and free of debris.
• Inspect the saw blade regularly for damage.
• Lubricate the saw according to the manufacturer's instructions.
• Store the saw in a dry place.

By following these tips, you can help to keep your Craftsman CMXEGAR500 saw in good working condition and prevent common problems.

Craftsman CMXEGAR500 Manual

Craftsman CMXEGAR500 Bench Grinder

Safety Information

• Read and understand all safety warnings and instructions before using this bench grinder.
• Keep children and bystanders away from the work area.
• Always wear safety glasses with side shields when using this bench grinder.
• Use the correct wheel for the job. Do not use wheels that are cracked, chipped, or otherwise damaged.
• Always wear gloves when grinding metal.
• Do not overload the grinder.
• Never start the grinder with the wheel in contact with the workpiece.
• Always secure the workpiece before grinding.
• Keep the work area clean and free of debris.
• Disconnect the power before making any adjustments or cleaning the grinder.

Before Use

• Inspect the bench grinder for any damage before using it.
• Make sure that the guards are in place and in good working order.
• Connect the bench grinder to a properly grounded outlet.
• Set the speed of the grinder to the desired setting.

Troubleshooting

• If the grinder is not working, check the power cord and outlet.
• If the grinder is making noise, check the wheel bearings.
• If the grinder is smoking, turn it off immediately and disconnect it from the power.

Maintenance

• Inspect the guards and wheel nuts regularly for wear or damage.
• Replace the guards and wheel nuts if they are damaged.
• Clean the grinder regularly to remove dust and debris.
• Lubricate the wheel bearings regularly.

Warranty

This bench grinder is covered by a 3-year limited warranty. If the bench grinder fails due to a defect in materials or workmanship within 3 years of the date of purchase, it will be repaired or replaced free of charge.

Contact Information

For more information about this bench grinder, please contact:

• Craftsman Customer Service
• 1-800-347-3353
• www.craftsman.com

Additional Information

• The bench grinder can be used to grind metal, sharpen tools, and remove rust.
• The bench grinder should not be used to grind wood or plastic.
• The bench grinder should be used in a well-ventilated area.
• The bench grinder should be stored in a dry place.

Thank you for choosing Craftsman!